Hydraulic Goods Lift London

Hydraulic Goods Lift London Hydraulic Goods Lift London

Hydraulic Goods Lift 250kg single mast installed Hackney South Shoreditch London with a clear platform size 1200mm (1200mm door) x 800mm, finished floor level at 2500mm. Platform fitted with 3 x 1100mm high infilled panels on the non-loading sides in Red RAL 3020 to protect goods during the lifting process. Goods lift supplied with loading ramp size H80mm x W1300mm x L1000mm at lower level and “Press to Go” one touch controls with emergency stop at both levels.

While the lift is in raise or decent mode a continuous beeping sound notifies staff that the lift is in operation. To prevent damage from pallet trucks and fork lift trucks the power pack and hydraulic system is in enclosed in a lockable steel cabinet size D500mm x L500mm x H1300mm. Electrics 1 phase, 230v, 0.75Kw control voltage 24 volt IP55.

The self-supporting lift structure is manufactured from 100mm box section steel with welded mesh infilled panels RAL 7024. Goods lift manufactured with 2000mm high double loading gates with perspex viewing panels at each level and these are fitted with magnetic interlock system to ensure that the loading gates can only operate in conjunction with the lift controls and the lift will be prevented from operating if loading gates on any level are not fully closed. The overall height of the upper level guarding is 2200mm

Manual Handling Solutions – Mezzanine Goods Lifts have a wealth of experience in the design, manufacturing process and installing cost effective goods lifts in commercial, residential and industrial buildings properties in and around London and throughout the UK. We can design, manufacture and install a bespoke goods lift that accommodates almost any space and specifications. Our goods lifts range of hydraulic goods lifts are ideal for restaurants, pubs, museums, theatres, hotels, retail in basement or lightwell locations.

Installation; The Theatre Courtyard, 1 New Inn Yard, London, EC2A 3EE

 General Specification

  • Emergency lowering system when power is cut off
  • Pre wired control box included magnetic starter and overload fuse
  • Upper level travel limit switch and overload relief valve
  • Hydraulic cylinders feature emergency velocity fuse if line breaks
  • Control points are fitted to both ground and upper floor levels
  • The hydraulic power pack and electrical system housed separately at ground level
  • The raised height of the lift is governed by a switch system to ensure that the lift platform parks level with upper floor
Industrial Goods Lifts London London Hydraulic Goods Lift Loondon Goods Lifts Basement Goods Lift City London Compact Goods Lift London Goods Lift London Boroughs Goods Lift London Residential Goods Lift Ramp London Hydraulic Goods Lift London Industrial lightbox MACby VisualLightBox.com v6.1

Contact us on Tel 01553 811977 or email us at sales@manualhandlingsolutions.co.uk

Visit our main website www.manualhandlingsolutions.co.uk