Goods Lift Southall Middlesex

500kg through car Goods Lift installed Southall Middlesex with a finished floor height 3160mm enclosed in a self-support mesh shaft RAL 7024 Grey. The platform size 1500mm x 1500mm with 1100mm high infilled guarding on the non-loading sides finished RAL 3020.

At the entrance to the lift at both levels there will be 2000mm high loading gates, which will be fitted with magnetic interlocks to prevent the gates being opened unless the platform is docked at the appropriate level and prevent the lift being operated unless all gates are closed. At ground level a 1250mm long fixed ramp will be provided to assist loading on to the 100mm deep platform.

Goods Lift fitted with standard call and send type controls fitted to each floor including emergency stop button. Power 3 phase, 400v, 50Hz, 1.5Kw with control voltage IP55, lift speed 0,10 m/s.

General Specification

• Emergency lowering system when power is cut off
• Pre wired control box included magnetic starter and overload fuse
• Upper level travel limit switch and overload relief valve
• Hydraulic cylinders feature emergency velocity fuse if line breaks
• Control points are fitted to both ground and upper floor levels
• The hydraulic power pack and electrical system housed separately at ground level
• The raised height of the lift is governed by a switch system to ensure that the lift platform parks level with upper floor